Induction Bulb Replacement Lamps are ideal replacement lamps for HID lighting systems (indoors and outdoors) including Mercury Vapor (MV), Metal Halide (MH) and High Pressure Sodium (HPS) lamps.

Applications include; Canopy Fixtures, Gas Station Fixtures, Decorative Acorn Fixtures, Shoebox Fixtures, Wall Pack Fixtures, Can Lighting Fixtures, Bollard Lighting Fixtures 

Induction Bulb Replacement Lamps

	Induction TE-Type Bulb Replacement Lamp  The UT-26 series kit is offered in a variety of wattages and the universal mounting position makes it an excellent choice for a variety of applications. It can replace existing HID lighting systems up to 150W available in 20w to 80wUniversal Mounting Positions: Base up, Base down, Horizontal UNV = 120-277 VAC: BASE :E26 or E40 – Note : Ballasts are included in the Retrofit Kits
	Induction U-Type Replacement Lamp It can replace existing HID lighting systems up to 200W.   available in 30w to 100w, Universal Mounting Positions: Base up, Base down, Horizontal Voltage: UNV = 120-277 VAC; 480 = 347-480 VAC (Uses Separate Step-Down Transformer)
	Induction Oval Bulb-Type Replacement Lamp It can replace existing HID lighting systems up to 250W. available in 80w to 165w, Recommended for Base Down Applications – Post-Top Fixtures, Decorative Acorn Fixtures
	Induction Pear Type Replacement Lamp It can replace existing HID lighting systems up to 250W.  available in 80w to 165w, Recommended for Base Down Applications – Post-Top Fixtures, Decorative Acorn Fixtures
	Induction Bulb Flush Mount Pear / Oval Replacement Lamps Ideal replacement lamp for outlawed mercury lamps in outdoor acorns Flush Mount version. Flush Mount installation for increased thermal management. It can replace existing HID lighting systems up to 250W.  available in 80w to 165w, Universal Mounting Positions: Base up, Base down, Horizontal
	Induction Light Circline Replacement Lamp Ideal replacement lamp for Metal Halide or High Pressure Sodium indoor or outdoor light fixtures with Mogul (E40) base. (Medium E26 base optional) UNV = 120-277 VAC. Note : Ballasts are included in the Retrofit Kits available in 40w to 250w. Specify stem lengths of; none, 3.5″, 5.5″, 7.5″ or 8.5″ Universal Mounting Positions: Base up, Base down, Horizontal (mounting brackets to mount to the top of the fixture and bypass the socket and hard wire to the ballast)
	Induction Rectangle Type Replacement Lamp Ideal replacement lamp for Metal Halide or High Pressure Sodium indoor or outdoor light fixtures. Mounting brackets to mount to the top of the fixture and bypass the socket and hard wire to the ballast available in 40w to 250w. use two-200 watt rectangles side by side to replace a 1000w Metal Halide

Gas station canopy induction light retrofit kits for recessed lamp fixtures. Designed to fit in the LSI Scottsdale and Encore Fixtures or any other 12 x 12 canopy fixture. At a 1/3 of the cost of an LED retrofit, these gas station canopy induction light retrofit kits are the ideal solutions for gas station and c-store owners looking to reduce their lighting expense.  

Gas Station Canopy Induction Light Retrofit Kits

Induction Light Circline retrofit kit Ideal replacement lamp for Metal Halide or High Pressure Sodium indoor or outdoor light fixtures with Mogul (E40) base. (Medium E26 base optional). UNV = 120-277 VAC. Note: Ballasts are included in the Retrofit Kits. Specify stem lengths of; none, 3.5, 5.5, 7.5 or 8.5. brighter white light (5000K) for greater visibility and safety. high quality – glare-free light – with CRI above 83. electronic ballasts made with long-life components. instant on – flicker-free – cold start – hot re-start. high power factor – low THD ballast technology. advanced phosphors for high lumen maintenance & high lumen output.Available in 40w to 250w.

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Induction Lighting is the newest, greenest, and most powerful light source in the world today. Induction Lighting uses electromagnetic energy to form light. Electromagnetic coils excite the gas in a glass tube to produce light. This process uses most of its energy to produce light, not heat.

Why replace High Bay Metal Halides with Induction Lighting?

The re-strike time is a mere 1/2 second and continues to get bright for a warm-up period of 24 seconds. Unlike HIDs like metal halide which can take up to 15 to 20 minutes to return to full brightness. 

With incredible longevity of 100,000 hours, Induction lamps are most ideal for area lighting for warehouses, parking garages, underground parking lots, large commercial buildings, gymnasiums, etc. 

Virtually no maintenance, simple to work on, simple to maintain

A range of color temperatures for the specific environment. From 2500k to 6000k 

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Induction lighting can be integrated with motion sensors. There are a couple of advantages to using Induction Lighting With Motion Sensors. There is no delay in switching on/off. In addition, repeated on/off in high traffic areas will not affect the longevity of the light as it may with an electrode charged fluorescent

Motion sensors for Induction lighting will turn the fixture off when there is no motion or you can use step dimming which will turn the light down to a selected power percentage when there is no motion and back up to full power when there is motion.

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Compared to LED lighting or Fluorescent lamps or HID lighting fixtures like Metal Halide (MH), High-Pressure Sodium (HPS), or Mercury Vapor (MV), Induction Lighting technology is proven to be a long life, energy-saving, and maintenance saving solution sought by store owners and facility managers.

First introduced and patented in 1891 by Nikola Tesla, Induction Lighting were always prized for their; high lumens per watt, low operating temperatures, crisp color, long lamp life and low lumen depreciation over their entire life.

Induction lighting is the preferred light source in buildings and areas wherever replacement and maintenance of lights can be difficult. Areas like parking lots, industrial buildings, cafeterias, gymnasiums, signage, tunnels, cold storage units, bridges, street lighting, roadways, public spaces, etc

Today, as communities and businesses search for ways to reduce energy consumption, Induction Lighting and LED are the two light sources offering real-world energy-saving potential.   

What are the advantages of Induction Lighting vs LED

Fixture Lifetime – Induction Lighting is rated at 100,000 hours

Warranty – 10-year manufacturer warranty 

Wattages Availability – From 23 watts bulbs up to 400 watts Low Bay and High Bay lighting fixtures 

Short ROI – a 2 to 3 year ROI when factoring in energy and maintenance costs. (Without energy rebates or tax incentives)

Area Lighting – Induction Lighting is designed to light large areas like parking lots,  factory floor, warehouse space, etc. LED is better suited for display or spotlighting

Lumen Depreciation – Induction Lighting has slow lumen depreciation (light loss) and can maintain up to 70% of original lumens for 60,000 hours or more. 

Proven Technology –  Induction Lighting has been in use for many years with proven results

Purchase Price – The lower price for Induction Lighting

What are the advantages of LED vs Induction Lighting

Operating Temperature – Minimum operating temperature as low as -40 F

Durability – Since the LEDs are solid-state devices, they are more resistant to vibration and impact compared to the induction lamps which are made of glass

Display Lighting  – LEDs are ideal for compact forms where spot lighting or display lighting is most needed i.e. traffic signals, signs, product shelving lighting 

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Energy savings are realized immediately upon the installation of new efficient Induction Lighting because of the lower power consumption. Induction lamps consume only 50% of HID (Metal Halide, High-Pressure Sodium, Mercury Vapor), and fluorescent lamps

Maintenance Savings – What is the cost of lighting system maintenance when work is suspended to change out ballasts and lamps? (especially in those hard to reach locations) Induction Lighting can help you minimize maintenance costs in terms of its long life. In many cases, the total maintenance costs will often exceed energy savings!

Longer Life – Induction Lighting amps last 5 to 10 times longer than the outdated, inefficient light sources and exceed 100,000 hours of rated lifetime (that is over 22 years of 12 hours of ignition per day). For you, this means re-lamping costs can be virtually eliminated.

Color Perception – A high color rendering index (CRI) of greater than 85 combined with a 5000k (“natural daylight”) is crucial to visibility, safety, and comfort.

Heat Factor – Induction lighting generates less heat and substantially reduces ambient inefficient heat loss. Your refrigerated compressor and building air conditioning will cycle on and off less frequently.

Re-Strike – Induction Lighting features instant re-strike without warming up, a big plus for safety and security.

Cold Ignition – Induction Lighting is a preferred light source for cold storage and outdoor lighting applications in cold areas. Performing at temperatures of -40 degrees C (-20 degrees F)

Flicker and Glare – associated with HID and fluorescent lamp is completely eliminated with Induction Lighting. Resulting in improved productivity, readability, eyesight. No more headaches

Noise – No humming or buzzing sounds with Induction Lighting. Achieving a comfortable environment for staff, vendors, and customers alike.

Utility Rebates – Many utility company rebates are offering higher incentives when replacing HID with Induction Lighting.

The many benefits of Induction Lighting combined with a short ROI make this “next generation” technology the best replacement light for your retrofit project.

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Q: What is the induction lamp system and how does Induction Lighting work?

A: The induction lamp system uses a revolutionary technology of light generation that combines the basic principles of induction and gas discharge. Void of electrodes this new technology delivers an unprecedented 100,000 hours of high quality white light.

Q: Why Induction Lighting?

A. Induction lamps offer an amazing 100,000 hours life making it virtually maintenance free. It offers crisp white light with 80+ CRI and a choice of 3000K, 4000K, 5000K color temperatures. The high CRI light makes colors look brighter, more vibrant and more attractive. It produces up to 80 lumens of light for each watt of energy. This 80 LPW efficacy makes it as energy efficient as high CRI metal halide systems. Induction lamps offer high reliability and instant on and off. With less heat output.

Q. Do I need to remove the old existing ballast?

A. Yes.

Q. Are Induction Lamps instant on and is the hot restrike instant?

A. Yes. The lamp turns on instantly and produces between 75% and 80% of full output immediately. The lights take between 90 and 180 seconds to reach 100% of light output depending on the model of the lamp. The warm-up cycle is barely noticeable to the eye. If the lamps are turned off and then immediately turned back on the benefit of the Induction Lamp turns them back on immediately when the power is restored

Q. Will an Induction Lamp work with a motion sensor, dimmer control, photo cell or time clock or relay control?

A. Yes

Q: Is the light output of an induction lamp affected by low temperatures or high temperatures?

A. The lamp’s amalgam fill technology and the heat conduction rod in the center create stable light output over a wide range of ambient temperatures, maintaining at least 85% of nominal lumens from -30° F to 130° F (for an enclosed

Q: Why is induction lighting technology worth more?

A: Induction lighting systems offer five to ten times the life of HID systems for only two to three times the cost of the HID lamp and ballast. In almost all cases the payback in maintenance savings will more than offset the additional cost of the initial system

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Induction Light Gas Station Canopy Installation

Many convenience store owners are looking for energy efficient solutions for gas station canopy lights. There are many similarities between an Induction Light (IL) and a LED, however, the following chart lists the areas where these two light sources differ

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

What would you do if the lights go out?

In case of a power outage, the new generation Induction High Bay Lighting with automatic emergency battery backup system provides security and peace of mind to your business. 

When the grid is knocked out by a natural disaster, or when there are rolling blackouts, the emergency battery backup system switches over automatically, providing uninterrupted lighting for 30 minutes.

Available in 200w and 250w, the main induction light source comes with a 40w battery backup induction light source. 

– Impact Resistant Non-yellowing, UV protected Polycarbonate Lens

– White cast aluminum gearbox with 3” mounting hook

– Ballast made with long-life components

– InstantON(TM) flicker-free Cold Start and Hot Re-Start

– Correlated Color Temperature of 5000 K for greater visibility

– High Power Factor, Low THD Replaceable Ballast

– Advanced phosphors for high Lumen Maintenance and high

lumen output

– Aluminum Anodized reflectors for superior long term performance

– Up to 20 years Maintenance-free operation

– Very High Output, High Light Quality and Very Long Life

– Light Sensor Detector (LD) – optional

– Motion Sensor Detector (MD) – optional

– 30 Minute operation – 40W Backup automatic switch-over Instant

start system

– 10 Year Warranty

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)

Induction lights retrofits replace the lamp and ballast in your existing fixture for half the cost of a new fixture. Install  induction lights retrofits for parking lot and canopy fixtures and eliminate maintenance costs with 100,000 hour rated lamps

– 60% Average savings over traditional metal halide HID canopy lights

– Extremely high light quality means your area will look more bright with natural light and increase customers.

– 5 year warranty on all induction retrofit kits

Certified Induction lights retrofits for parking lot and area lighting fixtures are now available for; Circline, Emco Lighting, Gardco Lighting, Hubbell Lighting, Kim Lighting, Lithonia and Phillips Quality Lighting. These custom Induction lights retrofits feature;

• custom designed anodized aluminum reflector for increased illumination
• bright white light – 5000k – for greater visibility and safety
• high quality – glare free light –  with CRI above 83
• electronic ballasts made with long life components
• instant on, flicker free cold start, and hot re-start
• high power factor and low THD ballast technology
• advanced phosphorus for high lumen maintenance and high lumen outout
• up to 20 year maintenance free operation
• retrofit kit comes completely assembled for simple drop-in installation
• 5 year warranty 

Buy Direct and Save $$$ – All of our lighting fixtures ship factory direct to your facility. Call sales toll-free (1-844-533-7767)